Radial stagebug sb 4 piezo di

€119.00

RADIAL STAGEBUG SB 4 PIEZO DI

In stock
Add to wishlist

Description

The StageBug SB-4 has a 1/4″ input for the instrument’s pickup and unlike many other DI boxes the SB-4 features very high 10meg-ohm impedance that smooths out tricky peaks that can give piezos a bad name. This high impedance also broadens the frequency response for a more natural and pleasing sound. The active circuit performs the high-to-low impedance conversion and balances the signal to enable long runs upwards to 100 meters without loss delivering spectacular linearity and low distortion throughout the audio range.

Feedback is eliminated on stage by the high-pass filter and 180 degree polarity reverse switch. This reduces excessive bottom end which also reduces resonance that can cause the top of the instrument to vibrate. The polarity reverse reduces any acoustic hotspots on stage whilst keeping the natural tone of the instrument. It does this by changing the phase relationship between the PA system and room acoustics which sometimes combine to produce peaks.

Connections include an AUX out for a stage amp plus a standard XLR output to feed the PA. The SB-4 is phantom powered so no batteries are needed. This compact pedal is ideal for orchestral artists, blue grass players and pop string quartets that need to turn it up when in concert.


Features/Specifications
•Audio circuit type: Piezo optimized active buffer
•Frequency response: 20Hz ~ 20kHz (± 1.0dB)
•Total harmonic distortion: <0.006%
•Dynamic range: 100dB
•Input impedance: 5Meg Ohms
•Maximum input: +4dBu
•Gain: +2dB
•Output impedance: 330k Ohms
•Equivalent input noise: -101dBu
•Noise floor: -97dBu
•Inter-modulation distortion: <0.01%
•Phase deviation: 10° @ 50Hz
•Switches: High Pass Filter, Phase, Ground Lift
•Low-cut filter: 150 Hz
•Filter slope: 6dB/octave
•Instrument input: ¼” buffered with piezo optimized load
•Auxiliary output: ¼” buffered to drive guitar effects, amplifier or tuner
•Balanced output: Pin-1 ground, pin-2 (+), pin-3 (-)
•Polarity reverse: 180°
•Ground lift (input): Soft lift with 100 Ohms to ground
•Construction: 16 gauge steel chassis & outer shell
•Finish: Baked enamel
•Size: 4.5″ x 1,85″ x 1.35″ (114mm x 47mm x 34mm)
•Weight: 0.55 lbs (250 grams)
•Shipping Size: 8.25″ x 5″ x 1.75″ (210mm x 127mm x 44mm)
•Shipping Weight: 0.8 lbs (365 grams)
•Power: 48V phantom power
•Warranty: Radial 3-year, transferable

SKU: SB4 Categories: , ,

Specification

Delivery Information

Delivery

Responsibility for ownership of the Goods passes to the purchaser once we have delivered them.

Unless otherwise advised, delivery will be made by a fully-insured courier service, within normal business hours. A signature at this address will be required.

The charge for delivery will be shown at the final checkout stage before final submission. Unfortunately X MUSIC IRELAND LIMITED cannot guarantee delivery times or dates. The delivery charge shown is a standard charge and does not constitute a guarantee of delivery date from the time you have placed an order.

All delivery times and dates are subject to stock availability in Head Office, the backlog of orders, and Weekend or Bank Holiday exceptions. Unfortunately X Music Ireland Limited can in no circumstances, therefore, compensate for delayed orders.

Damages/shortages must be notified within 3 working days of delivery.

This does not affect your statutory rights.

Irish Orders with a value of over €199 (€200 +) are shipped free of charge unless otherwise stated. Some goods like digital pianos may incur an additional cost. Please see your cart at the time of purchase.

Online purchases made outside the EU: Purchases made outside the EU may be liable for additional customs tariffs and/or local tax. These additional charges are the responsibility of the purchaser.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.