Description

Playing guitar in a great sounding room is the most inspiring, engaging playing experience imaginable – far more enjoyable than in a dry-sounding room like a lounge, office or den. Yamaha’s TransAcoustic Guitar recreates the incredible experience of playing in a rich, live room without needing any external amplification or effects – just the guitar itself. Whether you’re practicing, writing, recording or just playing for fun, the TransAcoustic Guitar will make you play better, longer and with more creativity. Once you’ve experienced it, you’ll never want to play another acoustic guitar again.

Yamaha FS-TA trans-acoustic guitar

The FS-TA TransAcoustic is an electro-acoustic guitar with a twist. Play as a standard acoustic and the concert shape body is comfortable and incredible detailed in its tone with great low and mids. However, the push of a single buttons transforms your sound with reverb and chorus effects emanating from the body of the guitar, enveloping you in the sound.

Actuator

An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar, and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body. Guitar in the diagram shown is the Yamaha LL-TA acoustic guitar not the Yamaha trans-acoustic FS-TA guitar

Simple Controls

Three simple knobs let you adjust the degree of effect applied and the lineout volume level. Additionally, keeping the controls small minimizes the area of the holes in the body material, reducing acoustic sound loss.(A) Chorus Control (B) Reverb Control (Room / Hall)(C) TA Switch / Line Out Volume Control* Pressing the TA Switch for more than 0.3 seconds activates the TA function.* When a cable is connected to the line-out jack, the lineout volume can be adjusted by rotating the (C) knob.* The reverb type switches from Room to Hall around the 12:00 position.

Newly Subtle Battery Box

Battery box integrated into the end-pin jack. This requires fewer holes in the body, thus reducing acoustic sound loss. Connect the cable from the jack to a PA or amp to use as an acoustic electric guitar.